Tightening Torque Specifications
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATION CHART
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kgf-m | lbf-ft | ||
| Yaw rate/G sensor assembly bolt | 8 | 0.8 | 6.0 | Install yaw rate/G sensor assembly to floor panel. |
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION .