Sub Fuel Level Sensor
Reference: SUB FUEL LEVEL SENSOR REMOVAL AND INSTALLATION
Check resistance between terminals (1) and (2) at each float position [a], [b] and [c].
If measured resistance is out of specification, replace sub fuel level sensor.
Sub fuel level sensor resistance
Standard
RESISTANCE REFERENCE
| Float position | Resistance |
|---|---|
| [a] 55.8 mm (2.20 in.) | 19.0 - 21.0 Ω |
| [b] 161.1 mm (6.343 in) | 102.8 - 112.8 Ω |
| [c] 239.9 mm (9.445 in) | 146.8 - 150.2 Ω |