DTC Troubleshooting
P0133 DIAGNOSIS PROCEDURE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK:J24B . |
| 2 | DTC check Is there any DTC(s) other than P0133? |
Go to troubleshooting for applicable DTC. | Go to Step 3. |
| 3 | A/F sensor signal circuit check
Are they in good condition? |
Go to Step 3. | Repair or replace defective wire harness. |
| 4 | DTC recheck
Is DTC P0133 still detected? |
Substitute a known-good ECM and recheck. | End. |