Yaw Rate/G Sensor Removal and Installation: Installation

Reference: YAW RATE/G SENSOR INSPECTION 

1. Before installing yaw rate/G sensor (1), check installing condition as follows.
   • Deformations around sensor installation area (2) (in sensor bracket).
   • Foreign matters on mating surface between sensor and sensor bracket.
2. Install yaw rate/G sensor (1) to floor panel.

   Tightening torque 

   Yaw rate/G sensor bolt (a): 6.5 N.m (0.65 kg-m, 5.0 lbf-ft) 

   Fig 1: Identifying Yaw Rate/G Sensor Bolts

   Courtesy of SUZUKI OF AMERICA CORP.
3. Connect connector to yaw rate/G sensor.
4. Install console box referring to CONSOLE BOX COMPONENTS .
5. Connect negative (-) cable to battery.