Operating Cylinder: Removal and Installation: Installation

Installation is in the reverse order of removal.

Operating cylinder bolts 35.3 N.m (3.6 kg-m, 26 ft-lb) 

• Tighten the clutch hose fitting to the specified torque.

  Clutch hose fitting Refer to [ Clutch Piping: Exploded View  ]. 

  CAUTION: Make sure the clutch hose is not bent or twisted.
  CAUTION: Do not reuse copper sealing washer.
• After installation, bleed the clutch hydraulic system. Refer to [CLUTCH FLUID: BLEEDING ].