Precautions in Speedometer Test or Other Tests
When performing speedometer or other tests using speedometer tester or chassis dynamometer, ESP® function must be deactivated by ESP® OFF switch or using SUZUKI scan tool to complete the tests correctly. When using SUZUKI scan tool, set to the "Sensor Calibration" under "Utility" mode to stop the ESP® function. Refer to SUZUKI scan tool operators manual for further details.
NOTE:
Even if ESP® is controlled not to work by pushing ESP® OFF switch or using SUZUKI scan tool, ESP® is reactivated when ignition switch is turned ON after ignition switch is turned OFF.