Fuel Leakage Check Procedure

WARNING: When performing the following procedure, be sure to observe Precautions on Fuel System Service and PRECAUTIONS FOR ENGINE in order to reduce the risk of fire and personal injury.

After performing any service on fuel system, check that there is no fuel leakages as follows.

Apply fuel pressure to fuel feed line.
1. Turn ignition switch to ON position to operate fuel pump.
2. After 2 sec., turn ignition switch OFF.
3. Repeat Step a) and b) three or four times.
4. Make sure that fuel pressure is applied to fuel line by placing hand on fuel feed hose and feel fuel pressure.
Check that there is no fuel leakage from any part of fuel system.