LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Keyless Start System) >> Diagnostic Information and Procedures >> DTC Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Table

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
DTC CHART

DTC (Flashing pattern of key indicator light) Detected parts item Detecting condition
11 Communication Error with Steering Lock Unit No communication is available between keyless start control module and steering lock unit
12 - Normal (No malfunction DTC is detected)
13 Release Signal Error from Steering Lock Unit Although lock release signal is output to steering lock unit, it is not inputted from steering lock unit
14 Steering Lock Unit Malfunction Steering lock unit cannot be unlocked due to its temperature rise
21 Internal Error in Keyless Start Control Module (EEPROM Reading Error) Data cannot be read from memory in keyless start control module
22 Internal Error in Keyless Start Control Module (EEPROM Writing Error) Data cannot be written into memory in keyless start control module
31 Lost Communication with BCM Keyless start control module cannot receive data sent by CAN from BCM
33 Control Module Communication Bus Off No communication is available with all control modules connected by CAN
51 Driver Side Door Request Switch Malfunction Input signal from driver side door request switch remains ON, unchanged
52 Passenger Side Door Request Switch Malfunction Input signal from passenger side door request switch remains ON, unchanged
53 Rear End Door/Trunk Lid Request Switch Malfunction Input signal from rear end door/trunk lid request switch remains ON, unchanged