Description of Alarm Function
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
Under conditions as described in the table below, the keyless start control module makes the key indicator light flash in red and the buzzer sound to call the driver's attention.
KEY INDICATOR LIGHT AND BUZZER OPERATION CONDITION
| Condition | Buzzer operation | Key indicator light operation |
|---|---|---|
| Ignition knob switch has stopped between ACC and OFF positions while driver side door is opened (ignition knob switch un-returned alarm) | Intermittent | - |
| Ignition switch has stopped between ACC and OFF positions while driver side door is closed (ignition knob switch un-returned alarm) | 2 times | Flashing in red |
| Remote controller is carried out of vehicle and doors are closed while ignition switch is at ON position (remote controller carried-out alarm) | 6 times | Flashing in red |
| Remote controller is carried out of vehicle through a window without opening door while ignition switch is at ON position (engine is running) and vehicle has been driven at 10 km/h (6 MPH) or more speed without remote controller in vehicle compartment (the first time 10 km/h (6 MPH) speed is exceeded only) (Remote controller carried-out alarm) | 6 times | Flashing in red |