LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program >> Diagnostics Information and Procedures >> DTC Clearance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Clearance

WARNING: If you do not select a suitable route and take proper precautions when performing a road test, an accident can occur
  • Select a level road with no traffic to minimize the risk of accident.
  • Perform the test extremely carefully.
  • Perform the road test using 2 persons, a driver and an assistant.
  1. Confirm that ignition mode of keyless push start system is in "OFF".
  2. Connect SUZUKI scan tool connector to DLC.
  3. Push engine switch to change the ignition mode of keyless push start system to "ON".
  4. Erase DTC according to instructions displayed on scan tool. Refer to scan tool operator's manual for further details.
  5. Perform "STEP 3: DRIVING TEST " in ESP® SYSTEM CHECK  and DTC CHECK  and confirm that NO DTC is displayed on scan tool.
  6. Disconnect SUZUKI scan tool connector from DLC after completing the DTC clearance.
scientia non olet · About LEMON Manuals