Stability Control

This function maintains the vehicle stability by controlling the engine and brakes to prevent the vehicle from oversteering or understeering while turning.

When understeering occurs, this function lowers the engine torque and applies brake to the inner rear wheel to prevent the vehicle from moving outward. When oversteering occurs, this function applies brake to the outer front wheel to prevent the vehicle from moving inward.

ESP® system is equipped with ESP® OFF switch. Refer to "ESP® Off Switch" under ESP® COMPONENT LOCATION  . Traction control function, stability control function and ESP® Cooperative Control under accelerative condition can be stopped and resumed by ESP® OFF switch or SUZUKI scan tool. However, traction control function, stability control function and μ-split control function under accelerative condition resume automatically when engine switch is pressed to change the ignition mode of keyless push start system to OFF and then to ON.