LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Electrical Devices >> Repair Instructions >> Procedure After ECM Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Procedure After ECM Replacement

CAUTION: When ECM and keyless start control module are replaced with new ones at the same time, perform "Immobilizer Key Registration" instead of "ECM Registration" using SUZUKI scan tool and immobilizer cable. Refer to "SUZUKI SDT Immobilizer Control System Operator's Manual" for the immobilizer registration.

After ECM is replaced with new one, perform the following procedures:

  1. Program calibration data to ECM. Refer to Suzuki ECU Programming System Operator's Manual.
  2. Register VIN data to ECM, see VIN REGISTRATION .
  3. Perform ECM Registration, see PROCEDURE AFTER ECM REPLACEMENT .
  4. Perform electric throttle control system calibration, see ELECTRIC THROTTLE CONTROL SYSTEM CALIBRATION .
scientia non olet · About LEMON Manuals