MAF and IAT Sensor Inspection: Notes
Reference: MAF AND IAT SENSOR REMOVAL AND INSTALLATION
CAUTION:
- When servicing MAF and IAT sensor, be sure to observe the following items.
- Do not disassemble MAF and IAT sensor.
- Do not expose MAF and IAT sensor to any shock. If they have been dropped, they should be replaced.
- Do not clean MAF and IAT sensor.
- Do not blow compressed air using air gun or the like.
- Do not put finger or any other object into MAF and IAT sensor.
- Do not heat MAF and IAT sensor higher than 100°C (212°F). Otherwise, it will be damaged.