Module - Sunroof Controller (RHD) - Remove And Replace: Installation

Installation procedure is the reverse of removal, except for the following:

• Reinstall the latest vehicle firmware, or update the firmware if not the latest. See Firmware Reinstall - Touchscreen or Firmware Update .
• For vehicles with a Panoramic Sunroof: Use Toolbox 2 to run the Panoramic Sunroof Calibration, and then run the Panoramic Sunroof Cycle Test.
  CAUTION: The sunroof opens and closes during Calibration and Cycle Test. Make sure that the glass is clear of obstructions prior to running the Calibration and Cycle Test.