Drive Cycle Calibration - Forward Facing Camera: Calibration
- Connect a laptop with Toolbox 2.0 or later to the vehicle.
- On the touchscreen, touch Controls (vehicle icon), and then touch the Software tab to display the vehicle firmware version.
- Verify that the vehicle firmware version is 1.67.80 or later, and update if necessary.NOTE: Update the vehicle firmware. See Firmware Update .
- In Toolbox, select Panels > Driver Assist > Camera Calibration .
- Click the Start/Play button.
- Follow the onscreen instructions to calibrate the forward facing camera.WARNING: Perform the calibration procedure in a suitable location and comply with all local traffic safety laws.NOTE: Have an assistant monitor Toolbox during the drive cycle.