Harness - Media Control Unit - Retrofit: Notes
Last modified: 18/11/2022 10:16:09
Special tools required for this procedure:
| Supplier | Part Number | Description |
|---|---|---|
| Tesla | 1025812-00-A | Pin Drag Kit |
NOTE:
This procedure might contain steps to use Toolbox 2 to supplement the service operation. Toolbox 2 and its Panels are being phased out and replaced with Toolbox 3 routines.
This document describes J Harness retrofit procedures for replacement MCUs on Model S cars build from start of production (SOP) to December 2015.
NOTE:
Refer to the Model S Circuit and Connector Reference for additional information.