Gateway SD Card - Media Control Unit - Remove And Replace: Notes

Last modified: 18/11/2022 10:18:58

NOTE: This procedure replaces the standard SD card that stores the gateway configuration and information. To replace the Micro SD card that has navigation information, refer to NAVIGATION MICRO SD CARD - MEDIA CONTROL UNIT (REMOVE AND REPLACE) .

NOTE: This procedure only applies to MCUs that are revision E or later. For MCUs that are revision D or earlier, refer to SI-21-21-002.

NOTE: Atom based MCUs use a Micro SD card for gateway configuration and information. Refer to Removal (Atom based MCU) .

NOTE: Refer to these Toolbox articles for additional information:

SD card part numbers and application - #6244300
MCU revisions and SD card configuration - #26277
Micro SD card extraction - #5839100

NOTE: This procedure might contain steps to use Toolbox 2 to supplement the service operation. Toolbox 2 and its Panels are being phased out and replaced with Toolbox 3 routines.