Adaptive Air Spring Module - Front - LH - Remove And Replace: Notes
Last modified: 18/11/2022 10:12:41
NOTE:
When replacing an air spring module for failure, inspect all air spring modules for leak, wear, or reduced performance, and replace them as necessary.
Special tools required for this procedure:
| Part Number | Description |
| 1079041-00-A | Flare nut crowfoot set |
NOTE:
This procedure might contain steps to use Toolbox 2 to supplement the service operation. Toolbox 2 and its Panels are being phased out and replaced with Toolbox 3 routines.