SD Card - Car Computer - Remove and Replace: Remove
- Remove the 2nd row lower seat cushion. See SEAT CUSHION - LOWER - 2ND ROW (REMOVE AND REPLACE) .
- Remove the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
- Disconnect 12V power. See 12V/LV POWER (DISCONNECT AND CONNECT) .
- Remove the car computer connectivity board. See CONNECTIVITY BOARD - CAR COMPUTER (HW2.5) (REMOVE AND REPLACE) .
- Use a trim tool to slide the SD card retaining tab over, and then use plastic tweezers to remove the SD card from the computer.CAUTION: Make sure not to remove the SIM card, located to the left of the SD card in this illustration.
- Destroy the SD card by cutting the card in half through the center, and then cut each piece into half, resulting in 4 pieces.CAUTION: It is mandatory to destroy the SD card to protect user data.