Service Mode Plus: Procedure
- Connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 (Connect and Disconnect) NOTE: Upon successful connection, Service Mode Plus will be enabled, and the "Service Mode Plus" watermark will appear on the touchscreen.
- When finished performing the tasks that required Service Mode Plus, touch the Exit Service Mode
button at the top of the Service Mode menu.NOTE: If the Exit Service Mode button is not visible, touch and hold the Tesla "T" at the top of the touchscreen, and then type "service" into the prompt.
- Disconnect the laptop from the vehicle. See Toolbox 3 (Connect and Disconnect)