2nd Generation: Remove
- Open the liftgate and LH rear door.
- Disconnect 12V power DISCONNECT 12V POWER .
- Remove the trunk floor carpet Carpet - Trunk Floor (Remove And Replace) .
- Remove the liftgate rear wall trim Trim - Rear Trunk - Rear Wall (Remove And Replace) .
- Remove the LH C-pillar lower zone bracket Bracket - C-Pillar - Lower Zone - LH (Remove And Replace) .
- Remove the fasteners that secure the rear body controller to the body (torque 3.5 N.m).
- Disconnect the electrical connectors from the rear body controller.
- Remove the rear body controller from the vehicle.