Disable Service Mode
- Disable Service Mode using either a laptop with Toolbox 3 or the vehicle touchscreen.
- Touchscreen
- On the vehicle touchscreen, touch CONTROLS (vehicle icon) > SERVICE MODE > EXIT SERVICE MODE
at the top of the Service Mode menu.NOTE: The red "SERVICE MODE" overlay or red touchscreen border is removed.
- Return to the procedure that required Service Mode to be disabled.
- On the vehicle touchscreen, touch CONTROLS (vehicle icon) > SERVICE MODE > EXIT SERVICE MODE
at the top of the Service Mode menu.
- Laptop with Toolbox 3
- Connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 (Connect And Disconnect) .
- Unlock the vehicle gateway. See Gateway Unlock .
- In Toolbox 3, click the Actions tab, type "Service" into the search field, click PROC_ICE_X_EXIT-SERVICE-MODE , click Run , and then allow the routine to complete.
- Disconnect the laptop with Toolbox 3 from the vehicle. See Toolbox 3 (Connect And Disconnect) .
- Return to the procedure that required Service Mode to be disabled.
- Touchscreen