SD Card - Car Computer - Remove and Replace: Install
- Use plastic tweezers to install the new SD card into the computer with the gold pads up and facing away from the bulkhead.
- Install the car computer connectivity board. See CONNECTIVITY BOARD - CAR COMPUTER (HW2.5) (REMOVE AND REPLACE) .
- Connect 12V power. See 12V/LV POWER (DISCONNECT AND CONNECT) .
- Install the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
- Install the 2nd row lower seat cushion. See SEAT CUSHION - LOWER - 2ND ROW (REMOVE AND REPLACE) .