SIM Card - Car Computer (Info-Ryzen) - Retrofit: Procedure
- Disconnect 12V power. See 12V/LV POWER (DISCONNECT AND CONNECT) .
- Remove the passenger footwell cover. See COVER - FOOTWELL - PASSENGER (LHD) (REMOVE AND REPLACE) .
- Install the new SIM card into the car computer slot with the notch up and the gold pads facing away from the bulkhead.NOTE: Use a flashlight and inspection mirror to aid installation.CAUTION: Make sure that the SIM card goes into the slot, before releasing your grip of the SIM card.
- Carefully press the SIM card fully into the slot, so that the catch engages.CAUTION: If using a thin tool to press the SIM card in, use the tool as shown.
- Install the passenger footwell cover. See COVER - FOOTWELL - PASSENGER (LHD) (REMOVE AND REPLACE) .
- Connect 12V power. See 12V/LV POWER (DISCONNECT AND CONNECT) .
- Enable the external SIM card using Toolbox 3:
- Connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 - Connect and Disconnect .
- Select the Actions tab and search for "Toggle SIM Card".
- Select the ODIN routine PROC_ICE_X_ENABLE-DISABLE-SIM-CARD, and then click the link of the routine.
- Uncheck Enable_Onboard_Sim to disable the on-board SIM card.
- Click RUN , and allow the routine to complete.
- Disconnect the laptop from the vehicle. See Toolbox 3 - Connect and Disconnect .
- Perform a functional check of the LTE service.