LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Tesla >> 2021 >> Model 3 Performance >> Repair and Diagnosis >> Electrical >> Gauges >> Infotainment System -- Model 3 >> Touchscreen >> Service Panel - Instrument Panel - Remove and Replace >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Panel - Instrument Panel - Remove and Replace: Procedure

WARNING: This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
  1. Open LH front door.
  2. Lower LH front window.
  3. Release IP service panel from IP and disconnect temperature sensor connector.
    NOTE: 4x clips, 4x tabs, 1x connector.
    G00622546Courtesy of TESLA, INC.
    G00622547Courtesy of TESLA, INC.
  4. Remove bolts securing cabin temperature sensor to IP service panel.
    NOTE: 2x bolts, T20, 0.7 N.m (6.19 inch-lbs.).
    G00622548Courtesy of TESLA, INC.
  5. Remove the cabin temperature sensor from IP service panel.
    G00622549Courtesy of TESLA, INC.
  6. Position the cabin temperature sensor to new IP service panel for installation.
    G00622550Courtesy of TESLA, INC.
  7. Install bolts securing cabin temperature sensor to new IP service panel.
    NOTE: 2x bolts, T20, 0.7 N.m (6.19 inch-lbs.).
    G00622551Courtesy of TESLA, INC.
  8. Connect temperature sensor connector and install IP service panel into IP.
    G00622552Courtesy of TESLA, INC.
    G00622553Courtesy of TESLA, INC.
  9. Raise LH front window.
  10. Close LH front door.
scientia non olet · About LEMON Manuals