Section 7 (Body -- Model 3)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicle Lifting
- Bumper/Fascia
- Ankle Catcher - Remove and Replace
- Bracket - Fascia Center To Fender - LH - Remove and Replace
- Bracket - Fascia Side to Fender - LH - Remove and Replace
- Bracket - Rear - Center - Remove and Replace
- Bracket - Rear Wing - LH - Remove and Replace
- Bracket - Taillight - LH - Remove and Replace
- Bumper Beam - Front - Remove and Replace
- Bumper Beam - Rear - Remove and Replace
- Extrusion - Bumper Beam - Active Hood - Front - Remove and Replace
- Cover - Tow Hook - Front - Remove and Install
- Crush Can - Upper - Front - LH - Remove and Replace
- Fascia - Front - Remove and Install
- Fascia - Front - Remove and Replace
- Fascia - Rear - Remove and Install
- Fascia - Rear - Lower - Remove and Replace
- Fascia - Rear - Upper - Remove and Replace
- Foam - Bumper Beam - Front - Remove and Replace
- Grille - Fascia - Front - Remove and Replace
- Liner Stiffener- Front Wheel House - LH - Remove and Replace
- Reinforcement - Front Fascia - LH - Remove and Replace
- Tow Hook - Front - Remove and Replace
- Trailer Hitch - Rear Energy Absorber - Retrofit
- Valance - Front Fascia - Remove and Replace
- Body Panels
- Body Reinforcement - Floor - 2nd Row - Remove and Replace
- Brace - Shock Tower - Remove and Replace
- Brace - Shock Tower (Heat Pump) - Remove and Replace
- Carrier - Front End - Remove and Replace
- Carrier - Front End (Heat Pump) - Remove and Replace
- Crush Can - Front Subframe - LH - Remove and Replace
- Door - Front - LH - Remove and Install
- Door - Front - LH - Remove and Replace
- Check Strap - Door - Front - LH - Remove and Replace
- Check Strap - Door - Rear - LH - Remove and Replace
- Door - Rear - LH - Remove and Install
- Door - Rear - LH - Remove and Replace
- Fender Assembly - Front - LH - Remove and Install
- Fender Assembly - Front - LH - Remove and Replace
- Fender Support - Front - LH - Remove and Replace
- Hood - Remove and Install
- Hood - Remove and Replace
- Power Trunk - Remove and Install
- Power Trunk - Remove and Replace
- Stud - Bump Stop - Lamp Can - LH - Repair
- Stud - Bump Stop - Lamp Can - Pair - Repair
- Trunk - Remove and Install
- Trunk - Remove and Replace
- Windshield and Body Glass
- Glass - Backlight (Non-Heat Pump) - Remove and Replace
- Glass - Backlight (Heat Pump Model) - Remove and Replace
- Glass - Backlight (Heat Pump) - Remove and Install
- Glass - Backlight - Remove and Install
- Glass - Body - Rear Quarter - LH - Remove and Install
- Glass - Body - Rear Quarter - LH - Remove and Replace
- Glass - Roof - Fixed - Remove and Replace
- Seal - Trunk Flip - Backlight - Remove and Replace
- Sensor - Relative Humidity and Temperature - Remove and Replace
- Windshield - Clean Camera Area
- Windshield (HW4) - Remove And Replace
- Windshield (Reuse Humidity and Temperature Sensor) - Remove and Replace
- Windshield (Vehicles with 2nd Generation or Later Autopilot) - Remove and Replace
- Windshield and Roof Glass Repair and Replacement Guidelines
- Paint
- Panel Alignment