Firmware Reinstall - Contactors Closed
- Connect a laptop with Toolbox 3 to the vehicle. See TOOLBOX 3 (CONNECT AND DISCONNECT) .NOTE: Locally connecting the vehicle to Toolbox 3 will automatically enable Service Mode Plus.
- In Toolbox, select the Actions/Autodiag tab, and then search for "redeploy".
- Run
the appropriate routine and wait for the reinstallation to complete. Reinstallation status can be monitored on the vehicle touchscreen.
- Service CAN Redeploy (UPDATE_CAN-REDEPLOY) - A "partial" firmware reinstallation that reinstalls the currently installed firmware package to all module, ECU, and component replacements, with the exception of the car computer.
- Service Redeploy (UPDATE_SERVICE-REDEPLOY) - A "full" firmware reinstallation that reinstalls the currently installed firmware package to the car computer, and all module, ECU, and component replacements.
- Return to the procedure that instructed/required/requested a firmware reinstallation. Otherwise continue to the next step.
- Disconnect the laptop from the vehicle. See TOOLBOX 3 (CONNECT AND DISCONNECT) .
- Disable Service Mode. See SERVICE MODE (ENABLE AND DISABLE) .