Service Mode (Enable And Disable): Disable
- Disable Service Mode using either a laptop with Toolbox 3 or the vehicle touchscreen.
- Touchscreen
- On the vehicle touchscreen, touch CONTROLS (vehicle icon)
> Service Mode
> EXIT SERVICE MODE
at the top of the Service Mode menu.NOTE: The red "SERVICE MODE" overlay is removed.
- Return to the procedure that required Service Mode to be disabled.
- On the vehicle touchscreen, touch CONTROLS (vehicle icon)
> Service Mode
> EXIT SERVICE MODE
at the top of the Service Mode menu.
- Laptop with Toolbox 3
- Run the "PROC_ICE_X_EXIT-SERVICE-MODE" routine, and then disconnect the laptop from the vehicle.
- Return to the procedure that required Service Mode to be disabled.
- Touchscreen