TPMS - Sensor ID Drive Learn: Procedure
- Connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 (Connect and Disconnect) .
- Click the Actions tab, and then search for "TPMS Erase."
- Click PROC_VCSEC_X_TPMS-ERASE-AND-AUTOLEARN
, and then click Run
. Allow the routine to complete.NOTE: This action erases stored TPMS Sensor IDs.
- Disconnect the laptop with Toolbox 3 from the vehicle. See Toolbox 3 (Connect and Disconnect) .
- Drive the vehicle a short distance to verify all four TPMS sensor values are displaying on the touchscreen.NOTE: The sensors will begin displaying values at approximately 5 mph. When vehicle receives communication from the sensors with known IDs, It will quickly connect to them. If tire pressures do not populate, rescan each sensor and try again.