Wheel - Remove And Install: Remove
- Move the vehicle to a 2 post lift. See Raise Vehicle - 2 Post Lift
.NOTE: If using a floor jack, position the floor jack under the lift point at the wheel to be removed.
- On the vehicle touchscreen, touch Controls > Service > Suspension > Jack Mode to enable Jack Mode.
- Remove the lug nut covers (x5) from the wheel.
- Loosen, but do not remove the lug nuts (x5) that attach wheel to the hub.
- Raise vehicle to unload the suspension.NOTE: If using a floor jack, raise the vehicle to unload the suspension at the wheel to be removed.
- Remove the lug nuts (x5) from the wheel, and then remove the wheel from the hub.