SD Card - Car Computer - Remove And Replace: Install
- Position the SD card into the install guide.NOTE: Ensure the install guide slide is in the down position. Slide the SD card into the top of the tool from left to right until fully seated. The SD card contacts should be facing rearward during installation.
- Install the SD card into the vehicle.NOTE: Slide the guide locking tab upward until there is an audible click.
- Connect 12V power. See 12V/LV Power (Disconnect and Connect) .
- Install the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
- Install the RH footwell assembly. See Cover - Footwell - Passenger (LHD) (Remove and Replace) .
- Move the RH front seat to its original position.