OBD Connector - Retrofit: Rework
- Disconnect the LV battery and First Responder Loop. See LV Battery - Li-lon - Disconnect And Connect
.
- Remove the LH footwell cover. See Dash Panel - Driver Footwell Cover Assembly - Remove And Replace
.
- Remove Pin 3 (violet) wire terminal from OBD connector.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Remove Pin 11 (white) wire terminal from OBD connector.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Install heat shrink onto pin 3 and 11 wire terminals.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Apply tape to secure pin 3 and 11 reworked wire terminals onto OBD wire harness bundle.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Install the LH footwell cover. See Dash Panel - Driver Footwell Cover Assembly - Remove And Replace
.
- Connect the LV battery and First Responder Loop. See LV Battery - Li-lon - Disconnect And Connect
.