LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Tesla >> 2024 >> Model 3 Performance >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance, Inspection And Service -- Model 3 >> Service Modes >> Service Mode Plus >> Procedure using Toolbox
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Procedure using Toolbox

  1. Connect a laptop with Toolbox 3 to the vehicle. See TOOLBOX 3 - CONNECT AND DISCONNECT .
    NOTE: Upon successful connection, Service Mode Plus will be enabled, and the "Service Mode Plus" watermark will appear on the touchscreen.
  2. When finished performing the tasks that required Service Mode Plus, touch the Exit Service Mode  button at the top of the Service Mode menu.
    NOTE: If the Exit Service Mode  button is not visible, touch and hold the Tesla "T" at the top of the touchscreen, and then type "service" into the prompt.
  3. Disconnect the laptop with Toolbox 3 from the vehicle. See TOOLBOX 3 - CONNECT AND DISCONNECT .
scientia non olet · About LEMON Manuals