Section 48 (High Voltage System -- Model S)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
- High Voltage Testing
- Charge System Inlet
- Charger Port (China) - Remove And Retrofit
- Charge Port (China) - Remove and Replace
- Charge Port - Manual Release Of Cable
- Charge Port - Single Phase - Motorized - Remove And Replace
- Charge Port - Single Phase - Non-Motorized - Manual Release Of Cable
- Charge Port - Single Phase - Non-Motorized - Remove And Replace
- Charge Port Voltage Check
- Charge Port - 3 Phase - Remove And Replace
- Door - Charge Port - Remove And Replace
- Charger - 3rd Generation - Remove And Replace
- Door Assembly - Charge Port (China) - Remove And Replace
- Pin Carrier - Charge Port - Remove And Replace
- Safety Cap - Charge Port to HV Battery - Remove and Replace
- Onboard Charger
- Actuator - Dual Motor - Charger Port (China) - Remove and Replace
- Slave Charger - LH - 1st Generation - Remove And Replace
- Slave Charger - LH - 2nd Generation - Remove And Replace
- Master Charger - RH - 1st Generation - Remove And Replace
- Master Charger - RH - 2nd Generation - Remove And Replace
- Master Charger - RH - 2nd Generation - Dual to Single Charger (Modify)
- Charger - 3rd Generation - Remove And Replace
- Charger (China) - Remove And Replace
- Charge Port - Retrofit (China)
- DCDC Converter
- 40 Amp Fuse - Forward Junction Box - 2nd Generation (Dual Motor) Remove and Replace
- DCDC Converter - Remove And Replace
- DCDC Converter - 2nd Generation - Retrofit
- Forward Junction Box - Remove And Replace
- Forward Junction Box - 1st Generation - 20 Amp Fuse - Remove And Replace
- Forward Junction Box - 1st Generation - 40 Amp Fuse - Remove And Replace
- Fuses - DCDC Converter - 1st Generation - Remove And Replace
- HVIL Lid Switch - Forward Junction Box - Remove And Replace
- High Voltage Junction Box
- HV Junction Box - 1st Generation - Remove And Replace
- HV Junction Box - Cover - 1st Generation - Remove And Replace
- HV Junction Box - 2nd Generation - Remove And Replace
- HV Junction Box - Retrofit
- HV Junction Box And HV Harness - Retrofit
- HV Junction Box - Cover - 2nd Generation - Remove And Replace
- HV Junction Box - Reed Switch - 1st Generation - Remove And Replace
- Rapid Mate And Rapid Splitter
- HV Harnesses
- HV Harness - (HVJB To Charge Port - 2nd Generation) - Remove And Replace
- HV Harness - (Front Drive Unit To HVJB - 1st Generation) - Remove And Replace
- HV Harness - (FJB To Front Drive Unit - 2nd Generation) - Remove And Replace
- HV Harness - (Rear Drive Unit To HVJB - Small Rear Drive Unit) - Remove And Replace
- HV Harness - (Rear Drive Unit To HVJB - Large Rear Drive Unit) - Remove And Replace
- HV Harness - (Rear Drive Unit To HVJB (Subframe Removed)) - Remove and Replace
- HV Harness - Rapid Splitter to Charger Remove and Replace
- HV Harness - (Rapid Splitter To FJB - Small Drive Unit) - Remove And Replace
- HV Harness - Rapid Splitter to Rear Drive Unit Remove and Replace
- HV Harness - (3rd Generation Charger To Charge Port) - Remove And Replace
- Inline Fuse - HV Harness - (HVJB To Front Drive Unit - 2nd Generation) - Remove And Replace
- Inline Fuse To Busbar - HV Harness - (HVJB To Front Drive Unit - 2nd Generation) - Retrofit