Transmission Assembly: Remove, Install, and Overhaul
WARNING: This page is about the Pickup 3/4 Ton, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 4 Spd Trans, Model RN32,Model RN42 | 7.6 | A | ||
| 4 Spd Trans, Model RN37,Model RN47 | 6.1 | A | ||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.5 | C | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul: | ||||
| 4.4 | A | |||