LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1984 >> 4Runner Base >> Repair and Diagnosis >> Engine Performance >> System >> ECS Engine Control System >> Adjustments >> Throttle Position Sensor (TPS)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Position Sensor (TPS)

  1. Loosen 2 TPS retaining screws. Insert a .028" (.70 mm) thickness gauge between throttle stop screw and throttle. With ignition off and electrical connector disconnected, connect ohmmeter between terminals IDL and TL.
  2. Gradually turn TPS counterclockwise until ohmmeter needle deflects. Secure TPS retaining screws. Perform resistance tests for terminals IDL - TL.