Low Altitude
- Warm up engine, disconnect hose from distributor sub-diaphragm and plug hose end.
- Check ignition timing. Timing should be 5° BTDC. Reconnect hose to sub-diaphragm. Check that ignition timing advances to about 12° BTDC.
- Disconnect vacuum hose from lower port of HAC valve, and plug hose end. Disconnect vacuum hose between check valve and vacuum pipe at pipe side, and plug pipe end.
- Check that ignition timing remains stationary for longer than 1 minute. If timing changes, replace check valve. Stop engine and reconnect hose to vacuum pipe and HAC valve.
- Disconnect 3 hoses from pipes on top of HAC valve. Blow air into each hose and check that air flows into carburetor. Reconnect hoses to proper locations.