Riding Height Specifications: Toe-In: Rear

Vehicle must be on level floor and in straight-ahead position. Measure distance between each wheel disc and cam bolt center of suspension arm. Confirm both measurements are the same.
Move vehicle forward a few meters. Mark center of each rear tread and measure distance between marks of right and left tires. Advance vehicle until marks on rear side of tires come to front.
Measure distance between marks on front side of tires at the same point on tires and at same level. Loosen cam bolt. Adjust toe-in by turning left and right adjusting nuts an equal amount, but in opposite direction. See Fig 1. Toe-in will change 5/16" (2 mm) with each graduation of cam (one side). Tighten cam bolt.

Fig 1: Rear Toe-in Adjustment