Removal & Installation
WARNING: This page is about the 4Runner Base, G52, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 5.2 | C | |||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: EXTENSION HOUSING SEAL: Remove & Replace: | ||||
| 0.1 | B | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.5 | C | |||
| Combination Procedure: INPUT SHAFT BEARING: Remove & Replace: | ||||
| 5 Spd Trans, Front | 1.8 | A | ||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul: | ||||
| 4.4 | A | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.4 | C | |||