2WD (4A-GE)

Measure pick-up coil resistance between terminals "G(+)" and "G(-)", and between "NE(+)" and "NE(-)". Resistance should be 140-180 ohms when checked at room temperature.
If resistance is not within specification, replace distributor. See PICK-UP COIL RESISTANCE table. If resistance is within specification, proceed to PICK-UP COIL AIR GAP CHECK .

Fig 1: 2WD (4A-GE) Pick-Up Coil Distributor Connector Terminal ID

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: 4WD (4A-FE) Pick-Up Coil Distributor Connector Terminal ID

PICK-UP COIL RESISTANCE

Application	Ohms
All Models	140-180