Code 12, 13 - Rpm Signal

Code 12 is caused by loss of "NE" or "G" signal from distributor to ECU for at least 2 seconds after starter signal is received at ECU. Check distributor and ignition system components. See SYSTEM & COMPONENT TESTING article. Ensure starter signal exists at ECU. See CRESSIDA TEST NO. 8 OR CODE 43.

Code 13 is caused by loss of "NE" signal from distributor to ECU when engine RPM exceeds 1000 RPM. Check distributor and ignition system components. See SYSTEM & COMPONENT TESTING article.