Air Switching Valve (ASV)
- With engine operating at idle speed, disconnect vacuum hose from ASV. ASV is on left side fenderwell (front valve). Air should discharge from ASV. Reconnect vacuum hose.
- Check opening pressure of ASV relief valve. Disconnect air hose from check valve "A". Connect Air Pump Tester (09258-14010) to air hose. Disconnect vacuum hose from ASV and connect to vapor filter. See Figure.
- Block orifice on air pump tester with finger. Increase engine speed gradually and measure relief valve opening pressure. Opening pressure should be 5.7-8.5 psi (.40-.60 kg/cm2 ). Remove air pump tester. Reconnect vacuum hoses.