Retrieving Trouble Codes: Notes
NOTE:
On all models, Normal Mode is used to retrieve trouble code from ECM to determine problem area. On Celica 1.6L (4A-FE), Paseo, Pickup 2.4L, Previa, Tercel and 4Runner 2.4L, self-diagnostics system does not have Test Mode. On all other models, Test Mode is used to check for trouble codes when operating vehicle to simulate conditions in which trouble code was set. Test Mode helps determine malfunctions caused by poor electrical connections, which are difficult to determine using Normal Mode. Test Mode also checks for malfunction in starter signal circuit, A/C switch signal and Park/Neutral switch signal.
NOTE:
The Malfunction Indicator Light (MIL) on the instrument panel may also be referred to as CHECK ENGINE light.