Engine Sensors: Notes

NOTE: For locations of engine sensors not covered in this article, see appropriate THEORY/OPERATION article.

KNOCK SENSOR LOCATIONS ⁽¹⁾

Model

Location

Pickup 2.4L 4WD

In Cylinder Block, Below Air Cleaner

Pickup 3.0L

On Top Of Cylinder Block, Under Intake Manifold

⁽¹⁾	Knock sensor monitors ignition knock conditions and delivers an input signal to KNK or KNK1 and KNK2 terminals of Engine Control Module (ECM). The ECM uses input signal to determine ignition timing (spark advance) and control fuel injection system.