Trouble Shooting
WARNING:
Before performing service procedures on vehicle, disconnect negative battery cable. Wait at least one minute after disconnecting negative battery cable to avoid accidental air bag deployment on models so equipped.
- If a no-start condition exists and battery is known to be good, connect test light or voltmeter between starter solenoid terminal No. 50 and ground. See Figure or Figure .
- Turn ignition switch to START position. If test light or voltmeter does not indicate voltage, check main fusible links and large ampere main fuses in engine compartment relay box. If fusible links and fuses are okay, see IGNITION SWITCH CONTINUITY TEST and/or STARTER RELAY TEST under ON-VEHICLE TESTING.