LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1994 >> Tercel Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Emission Systems & Sub-Systems >> EGR Vacuum Modulator
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EGR Vacuum Modulator

  1. Mark locations and disconnect vacuum hoses from EGR vacuum modulator. Block ports "P" and "R" of EGR vacuum modulator. See Figure.
    NOTE: Ports "P" and "R" are the double ports on side of EGR vacuum modulator. Port "Q" is the single port on side of EGR vacuum modulator.
  2. Apply air pressure to port "Q". See Figure. Air should pass freely through air filter side of EGR vacuum modulator.
  3. Start and operate engine at specified RPM. See EGR VACUUM MODULATOR TESTING SPECIFICATIONS  table. Repeat test procedures in steps 1) and 2). Strong resistance of airflow should be felt. Replace EGR vacuum modulator if resistance is not felt. Reconnect vacuum hoses to proper locations.
EGR VACUUM MODULATOR TESTING SPECIFICATIONS

Application Engine RPM
Paseo & Tercel 2500
scientia non olet · About LEMON Manuals