Circuit Opening Relay

Ensure ignition is off. Remove circuit opening relay. See CIRCUIT OPENING RELAY LOCATION table.

NOTE: Circuit opening relay may also be identified using appropriate illustration in the THEORY/OPERATION article or wire color. See wiring diagram in the WIRING DIAGRAMS article.

CIRCUIT OPENING RELAY LOCATION

Application	Relay Location
Land Cruiser	In Relay Box Behind Driver's Side Kick Panel

Using ohmmeter, check continuity between specified terminals. See Fig 1.
Check circuit opening relay operation by applying battery voltage and ground and checking continuity between specified terminals. See Fig 2. Replace circuit opening relay if defective.

Fig 1: Testing Circuit Opening Relay (Checking Continuity)

Fig 2: Testing Circuit Opening Relay (Checking Operation)