Power & Ground Circuits

For testing of power/ground circuits, see procedures in the PIN VOLTAGE CHART S article. See ECM LOCATION table for identifying ECM mounting locations.

ECM LOCATION

Model	Location
Paseo	Bottom Center Of Dash, In Front Of Console

NOTE: Figs. Fig 1-4 identify ECM terminals which are used for performing tests on various components in this article.

Fig 1: Identifying ECM Terminals (M/T - Calif.)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Identifying ECM Terminals (A/T - Calif.)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Identifying ECM Terminals (A/T - Except Calif.)

Fig 4: Identifying ECM Terminals (M/T - Except Calif.)