LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1996 >> Avalon XLS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Relays >> Circuit Opening Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Opening Relay

  1. Ensure ignition is off. Remove circuit opening relay. See CIRCUIT OPENING RELAY LOCATION  table.
    NOTE: Circuit opening relay may also be identified using appropriate illustration in THEORY/OPERATION article and wire color. See appropriate wiring diagram in WIRING DIAGRAMS article.
    CIRCUIT OPENING RELAY LOCATION

    Application Relay Location
    Avalon Top Rear Corner Of Relay Box Located Behind Passenger's Side Kick Panel
  2. To test circuit opening relay continuity, using ohmmeter, check continuity between specified terminals. See Fig 1 and Fig 2.
  3. To test circuit opening relay operation, apply battery voltage and ground to relay and use ohmmeter to check continuity between specified terminals. See Fig 1 and Fig 2. Replace circuit opening relay if defective.
Fig 1: Testing Circuit Opening Relay - Checking Continuity
G95C32468Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Testing Circuit Opening Relay - Checking Operation
G95B32467Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002