LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1996 >> RAV4 2D Utility, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Relays >> Circuit Opening Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Opening Relay

  1. Ensure ignition is off. Remove circuit opening relay. See CIRCUIT OPENING RELAY LOCATION  table.
    NOTE: Circuit opening relay may also be identified using appropriate illustration in THEORY/OPERATION article and wire color. See appropriate wiring diagram in WIRING DIAGRAMS article.
    CIRCUIT OPENING RELAY LOCATIONS

    Application Relay Location
    RAV4 In Fuse/Relay Box Below Driver's Side Of Instrument Panel, Behind Kick Panel
  2. To test circuit opening relay continuity, using ohmmeter, check continuity between specified terminals. See Fig 1 and Fig 2.
  3. To test circuit opening relay operation, apply battery voltage and ground to relay and use ohmmeter to check continuity between specified terminals. See Fig 1 and Fig 2. Replace circuit opening relay if defective.
Fig 1: Testing Circuit Opening Relay - Checking Continuity
G95F32479Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Testing Circuit Opening Relay - Checking Operation
G95I32480Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals